SolarEdge Optimizers


Module Add-On / Retro fit Power Optimizers

Intersolar Award Winner 2012

The SolarEdge module add-on power optimizer is connected by installers to C-Si and thin-film modules. Ease of installation is completed by simply clipping the power optimizer to the module frame or by attaching it to the mounting rail with an optional Mount Kit. The add-on power optimizer is compatible with all framed modules supplied by Frankensolar to ensure any solution may be Optimized by SolarEdge. The SolarEdge power optimizer optionally attaches to the roof mounting rails with the Frankensolar "Optimizer Mount Kit" which keeps on-roof labor and mounting costs to a minimum.


Module Add-On Power Optimizers

Connected by installers to the PV module and compatible with a wide range of module power class and voltages:

Power Optimizer OP ModelModule PowerModule Voc
OP250-LV≤250W< 55V
OP300-MV≤300W< 75V
OP400-MV≤400W< 75V (Special Order)
OP400-EV≤400W< 125V (Special Order)

Commercial Power Optimizer

SolarEdge offers and option for Commercial solutions, connecting two modules per power optimizer:

Power Optimizer Model

Module Power

Module Voc



< 96V (Special Order)

* Rated combined STC power of 2 modules connected in series. Module of up to +5% power tolerance allowed.

Download Optimizer brochures, manuals & datasheets HERE

Feature highlights of the SolarEdge Optimizers:

* Module level monitoring is available only when installed with the SolarEdge inverters. No hardware or wiring is required to transmit data from the power optimizers to the inverter as the monitoring sensors and transmitters are built into the SolarEdge power optimizer and solar inverter. Measurement data is transmitted over the regular power lines.